Tie a rope on a glass bottle and make your own water-absorbent flower pot. The flowers will not die even if you don’t water them for a month!

Beer bottle water-absorbing flower pot

1. Prepare empty beer bottles at home (other wine bottles are also fine), scissors, hemp rope (a thicker rope), alcohol, lighter, gauze, and soil.

2. Wrap the hemp rope around the upper part of the wine bottle, tie a knot, and then apply alcohol.

3. Light the rope with a lighter.

4. After the rope has burned, quickly put it in cold water to cool it down. This way you can easily separate the glass bottle into two sections.

5. To avoid scratching your hands, grind the edge of the bottle with sandpaper.

6. Cut the gauze into squares and then make two small holes in the middle.

7. Take another long piece of hemp rope, pass the two ends of the rope through the two small holes, align them and twist them into a strand, and tie a knot at the end.

8. Place the head of the beer bottle upside down in the tail, put the gauze and rope in the upper part, trim the exposed gauze, and then fill with soil.

9. Plant the prepared green seedlings into the soil, add water to the bottom of the bottle, and immerse the end of the hemp rope in the water.

10. In this way, even if flower lovers forget to water the plant normally, it doesn’t matter, it will absorb water automatically.

Tin box flower pot

1. Prepare an iron box (biscuit box, tea box).

2. If you have a drill bit, you can use an electric drill. If you don’t have one, just use waste nails to slowly hammer out a few holes.

3. For aesthetic purposes, you can find some wrapping paper to surround the box, or you can leave it unwrapped.

4. After wrapping, put the prepared soil in it.

5. Use glue to stick on some decorations according to your own ideas.

6. You can use branches to make a frame for a house. After some creativity, we can get such a beautiful flower pot! Drought-tolerant plants can use iron boxes~

Paper Shell Cement Flower Pot

1. Prepare the remaining paper shell and fold it into the shape shown in the picture below. One big one and one small one.

2. First, spread the mixed cement on the bottom layer, then put on the large cardboard, and then fill the interlayer with cement.

3. After it dries, peel off the outer paper shell.

4. Then add soil and plant the flowers. Isn’t it beautiful?

Branch flower pot

1. Prepare tree branches and enough wire.

2. Arrange the branches and connect them together near the upper and lower ends with wire.

3. Adjust the wall and bottom of the flower pot to the appropriate size and connect them together.

4. Finally, add soil and plant the plants! Very suitable for flower lovers with a garden at home~

Plastic bottle flower pot

1. Prepare a large Coke bottle, thick rope, glue, and scissors.

2. Cut the Coke bottle in half and use the lower part. Make the cut smooth and avoid scratching it.

3. Use glue to wrap the rope around the wall of the bottle to form a "coat".

4. Heat the screwdriver on the gas stove, then poke a few small holes at the bottom of the bottle as drainage holes.

5. When you are done, it will look like this!

Homemade flower pots by flower lovers

So many beautiful homemade planters

Does it arouse the desire of flower lovers to make it by themselves?

Come and try it with Huahua!

Remember to share it with your friends who love life~